Firstly, we type 1-1-1-1 and then 2 times the Valet. The siren makes two sounds. Now we can type our new password. We wait for the green light to be stabilized and then we type again to confirm the password we have already typed before.

When ignition is running we push the button of the tag continuously for 3 flashes of the lamp and the Mode is confirmed with a sound(one time).

Whether ignition is running or not we push the button of the tag continuously for 3 flashes of the lamp and the mode is confirmed with a sound(2 times).

We insert the password digits from the Valet(led) button, with a pause of 2 seconds between the digits inserted (example for the number 3 we push three times and then we wait 2 seconds before we start inserting the next digit.)

1. We a disarmed system we insert the code Service 1-1-1-1 (do not forget the 2 second pause after every digit)

2. After the insert of the password Service 1-1-1-1 we choose the level that we want to deactivate pushing 13 times quickly for code immobilizer removal of 15 times for removing the Tag.

   After selecting the level, the siren will make 13 or 15 times(depending the selection) and the lamp will remain green for a sort time of period.

3. We insert the secret code of Pandora card(we do not forget the pause of 2 seconds between the digits).

   If the process is completed correctly you will hear two sond from the siren and the led light will be red.

The time Tag will remain in operation depending on the use we make and the quality of the batteries we put in it.

We suggest in putting good quality batteries, so you can ensure the good operation of the Tag. If the battery is low there will be warnings of 3 sounds on the beeper, every time you start ignition or/and with text message(replace battery in tag) for GSM systems.